Glassworks Services Handmade Supplying glass makers since 1987 - Part of the Simba Materials Ltd group - suppliers to hand made crafts

  Tel : 01709 770801

Co Reg No 5659119

   Fax : 01709 770803

enquiries@glassworksservices.co.uk  Simba Materials Limited t/a Glassworks Services Handmade  Unit 8 Broomhouse Lane Industrial Estate, Edlington, Doncaster DN12 1EQ

Delivery charges and VAT will be added on to all orders. Prices on this website and in all downloads are net of VAT. Prices are subject to change without notice.

All prices are in GBP - often per kg - and need delivery and VAT to be added. For some items there are pictures or more information if you press on the link. You can order by email, phone, fax but but you cannot pay online - please see ORDERING

Please Note

Delivery Charges

Jim Moore Jacks & Shears

For Jim Moore full range - go to JIM MOORE MAIN PAGE

jim moore

SC700                  £242.40

6" Standard Blade Jack

  • total length -
  • blade length - 152 mm
  • handle width

SC701                  £242.40

8" Standard Blade Jack

  • total length - 400 mm
  • blade length - 205 mm
  • handle width - 40 mm

SC702                  £257.20

9" Standard Blade Jack

  • total length - 465 mm
  • blade length - 230 mm
  • handle width - 40 mm

SC703                  £272.00

10.5" Standard Blade Jack

  • total length - 525 mm
  • blade length - 270 mm
  • handle width - 50 mm

SC704                  £257.20

8" Round Blade Jack

  • total length - 400 mm
  • blade length - 205 mm
  • handle width - 40 mm

SC705                  £264.60

9" Round Blade Jack

  • total length - 465 mm
  • blade length - 230 mm
  • handle width - 40 mm

SC706                  £279.50

8" Fine Blade Cup Jack

  • total length -
  • blade length - 205 mm
  • handle width

SC707                  £360.90

7" Fine Blade Goblet Jack

  • total length -
  • blade length - 180 mm
  • handle width

SC709                  n/a

6.5" One Piece Wire Jack

  • DISCONTINUED

SC710                £110.50

Cup Shears

  • blade length - 43 mm
  • cut length - 26 mm
  • tip opens 22+ mm

SC711                 £110.50

Trim Shears

  • blade length - 65 mm
  • cut length - 40 mm
  • tip opens - 33+ mm

SC712                  £110.50

Duckbill Shears

  • blade length - 78 mm
  • cut length - 48 mm
  • tip opens - 50+ mm

SC713                  £114.90

Bubble Shears

  • blade length - 105 mm
  • cut length - 65 mm
  • tip opens - 58+ mm

SC714                   £123.80

Casting Shears

  • blade length - 130 mm
  • cut length - 80 mm
  • tip opens - 90+ mm

SC715                  £128.20

Large Diamond Shears

  • blade length - 123 mm
  • cut length - 75 mm
  • tip opens - 60+ mm
  • diamond - 67+ mm

SC716                   £132.60

Standard Diamond Shears

  • blade length - 102 mm
  • cut length  - 63 mm
  • tip opens - 60+ mm
  • diamond - 64+ mm

SC717                   £132.60

Compact Diamond Shears

  • blade length 102 mm
  • cut length - 63 mm
  • tip opens - 90+ mm
  • diamond - 82+ mm

SC718                   £137.10

Czech Shears

  • blade length - 75 mm
  • cut length - 34 mm


The following shears are available in D2 grade harder steel for boro-silicate or other hard glasses


  • Cup Shears
  • Trim Shears
  • Duckbill Shears
  • Bubble Shears
  • Casting Shears


Please ask for extra charge (£60-£80 extra) and the shears will need to be ordered specially from Jim.

Shear sizes are based on the following:-

  • blade length measured from the nut to tip
  • usable cut length with a typical hand opening the shear by 9cm at widest point
  • opening is from point to point at the tip and for diamonds from side to side using the typical hand opening as above.

Compact Diamond Shears open much wider due to the handle shape!

We usually have in stock in Doncaster the most popular twenty or so items.  We order every month (some times several times a month) so we can get what you want from Jim reasonably quickly.